Home » DIGITAL TOOLS » ARM602-4A 1/2" Digital Torque Adapter
ARM602-4A 1/2" Digital Torque Adapter
ARM602-4A 1/2" Digital Torque Adapter ARM602-4A 1/2" Digital Torque Adapter ARM602-4A 1/2" Digital Torque Adapter ARM602-4A 1/2" Digital Torque Adapter
ARM602-4A
1/2" Digital Torque Adapter
 
Features

● Static torque measurement.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows N-m (or kg-cm, in-lb, ft-lb) measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Set, Peak or Trace modes.
EAN : 4716872177028
 
Specifications
Model Number ARM602-4A
Drive 1/2" Square
Length 3" (75 mm)
Width 1-27/32" (47 mm)
Height 1-29/32" (48 mm)
Accuracy * CW ± 1.5%; CCW ± 2.5%
Measured Torque Range 25-250 ft-lbs
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 1 Minute of No Use
Operation Temperature 0-50°C
Storage Temperature -10~60°C
Battery Coin cell CR2032 x 2
Tool Weight 0.44 lbs (0.20 kg)
 * Accuracy Rating applies from 20% to max torque. Example: Torque range with max. 100 ft-lbs will have stated accuracy rating between 20~100 ft-lbs
 
Resources: 

  ACDelco Tool Manual - ARM602-xx

  ARM602-x Product FAQ and Support Page 

  ACDelco Torque Cube - AAPEX2012  by  Tool Skool

  Digital Torque Adapter by ToolinAction 
 
 
 
 

 



Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Continue
Tags: 1/2" Digital Torque Adaptor,
Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.