Home » ARM302-4S 1/2" Digital Torque Adapter
ARM302-4S 1/2" Digital Torque Adapter
ARM302-4S 1/2" Digital Torque Adapter
ARM302-4S
1/2" Digital Torque Adapter
 
Features

● Static torque measurement.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows N-m (or kg-cm, in-lb, ft-lb) measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Set, Peak or Trace modes.
 
  ACDelco Torque Cube - AAPEX2012  by  Tool Skool
  Digital Torque Adapter by ToolinAction 
Flyer pdf     Need higher resoultion file?
  ACDelco Tool Manual - ARM302-4S
Specifications
Model Number ARM302-4S
Drive 1/2" Square
Accuracy CW ± 1.5%; CCW ± 2.5%
Measured Torque Range 12.5-250.7 ft-lbs (17-340 Nm)
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 1 Minute of No Use
Memory Set 30
Battery Type 2 x CR2032 (included)
Battery Life (Continuously Use) 37 Hours
Operation Temperature -10-60°C
Storage Temperature -20~70°C
Service Life Test 10,000 Cyle
Tool Weight 0.40 lbs (0.18 kg)
 
Resources
 
 
Accessories (Optional)
 
 
 

 



Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Continue
Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.