ARM319-6A  3/4" Angle Digital Torque Wrench
ARM319-6A  3/4" Angle Digital Torque Wrench ARM319-6A  3/4" Angle Digital Torque Wrench ARM319-6A  3/4" Angle Digital Torque Wrench ARM319-6A  3/4" Angle Digital Torque Wrench ARM319-6A  3/4" Angle Digital Torque Wrench ARM319-6A  3/4" Angle Digital Torque Wrench
ARM319-6A
3/4" Angle Digital Torque Wrench
 
Features

● 720 degree maximum angle measure.
● Torque range: 44.28 - 442.8 ft-lbs.
● LCD Backlight display.

● 2 LEDs red / green for visual alerting.
● 30 data sets of memory capacity.
● 72 Gear teeth.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows kg-cm, N-m, in-lb, ft-lb measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Peak or Trace modes.
● Anti-slip soft grip.

 

 Flyer Pdf
  ARM3xx Torque Wrench User Manual
  FAQ
Specifications
Model Number ARM319-6A
Drive 3/4" Square
Accuracy CW ± 1.5%; CCW ± 2.5%
Gear Teeth 72
Measured Torque Range 44.28 - 442.8 ft-lbs (60 - 600 Nm)
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 2 Minutes of No Use
Vibration Warning Yes
Operation Temperature -10 - 60°C
Storage Temperature -20 - 70°C
Battery AA Alkaline Battery x2
Battery life 110 Hours 
Length 37" (940 mm)
Tool Weight 8.38 lbs (3.80 kg)
 
Resources
 
Accessories (Optional)
 
 
 

 


Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.