Home » DIGITAL TOOLS » Torque Adapter » ARM602-3 3/8" Digital Torque Adapter
ARM602-3 3/8" Digital Torque Adapter
ARM602-3 3/8" Digital Torque Adapter ARM602-3 3/8" Digital Torque Adapter ARM602-3 3/8" Digital Torque Adapter ARM602-3 3/8" Digital Torque Adapter
ARM602-3
3/8" Digital Torque Adapter
 
Features

● Static torque measurement.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows N-m (or kg-cm, in-lb, ft-lb) measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Set, Peak or Trace modes.
 

Specifications
Model Number ARM602-3
Drive 3/8" Square
Length 3" (75 mm)
Width 1-27/32" (47 mm)
Height 1-29/32" (48 mm)
Accuracy * CW ± 2%; CCW ± 3%
Measured Torque Range 5.9-59 ft-lbs (8-80 Nm)
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 1 Minute of No Use
Operation Temperature 0-50°C
Storage Temperature -10~60°C
Battery Coin cell CR2032 x 2
Tool Weight 0.31 lbs (0.14 kg)

* Accuracy Rating applies from 20% to max torque. Example: Torque range with max. 100 ft-lbs will have stated accuracy rating between 20~100 ft-lbs    

EAN: 4716872170708
Resources
 
Accessories (Optional)
 
 
 

 



Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Continue
Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.