ARM602-4  1/2" Digital Torque Adapter
ARM602-4  1/2" Digital Torque Adapter ARM602-4  1/2" Digital Torque Adapter
ARM602-4
1/2" Digital Torque Adapter
 
Features

● Static torque measurement.
● Standard functions: torque setting, measurement setting, mode setting.
● Operation in both clockwise and counter-clockwise directions.
● LCD display shows N-m (or kg-cm, in-lb, ft-lb) measurements.
● Audible torque confirmation by means of buzzer.
● Easy to set up Set, Peak or Trace modes.

 
  ACDelco Torque Cube - AAPEX2012  by  Tool Skool
  Digital Torque Adapter by ToolinAction 
Flyer pdf     Need higher resoultion file?
 
Specifications
Model Number ARM602-4
Drive 1/2" Square
Length 3" (75 mm)
Width 1-27/32" (47 mm)
Height 1-29/32" (48 mm)
Accuracy CW ± 2%; CCW ± 3%
Measured Torque Range 4-147.6 ft-lbs (5-200 Nm)
Resolution 1 kg-cm, 0.1 N-m, 1 in-lb, 0.1 ft-lb
Auto Shut-Off After 1 Minute of No Use
Operation Temperature 0-50°C
Storage Temperature -10~60°C
Battery Coin cell CR2032 x 2
Tool Weight 0.44 lbs (0.20 kg)
 
Resources
 
Accessories (Optional)
 
 
 

 



Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



Copyright © 2012 Mobletron Electronics Co., Ltd. All Rights Reserved.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors Trademarks used under license to Mobiletron Electronics Co., Ltd.